GE Oven Error Codes
GE ovens use F-codes for RTD, lock, keypad, and fan faults on JBS, JBP, and Profile PTS ranges.
General troubleshooting
Try these checks before opening a specific error code page—they resolve many GE oven faults without parts.
- 1Reseat oven probe—~1080 ohms at room temp for F03
- 2Dry control panel after spills
- 3Cool completely before self-clean
- 4Verify 240V supply on electric ranges
- 5Reset breaker after F13 memory errors
Common symptoms
Owners often search for a code after noticing one of these issues on their GE oven:
- F03 or F04 RTD probe faults on JB735SPSS
- F05 door lock during self-clean
- F11 shorted keypad after spill
- F10 runaway heat shutoff
- Convection fan F08 errors
All GE oven error codes
| Code | What it means | Guide |
|---|---|---|
| F03 | Open oven temperature sensorF03 means oven temperature sensor circuit is open. | View fix → |
| F04 | Shorted oven temperature sensorF04 indicates shorted oven sensor. | View fix → |
| F05 | Door latch motor faultF05 means door latch cannot lock or unlock. | View fix → |
| F06 | Door lock switch faultF06 means lock position feedback failed. | View fix → |
| F07 | Lock motor circuit failureF07 targets lock motor output failure. | View fix → |
| F08 | Cooling fan circuit faultF08 means cooling fan did not start when required. | View fix → |
| F09 | Oven over maximum temperatureF09 is safety shutdown from excessive cavity temperature. | View fix → |
| F10 | Runaway temperature detectedF10 indicates uncontrolled heating. | View fix → |
| F11 | Shorted touchpadF11 means short on keypad matrix. | View fix → |
| F12 | Stuck keypad detectedF12 is stuck-key without hard short. | View fix → |
| F13 | ERC EEPROM memory faultF13 means EEPROM checksum failed at power-up. | View fix → |
| F14 | ERC EEPROM data corruptionF14 is secondary EEPROM corruption. | View fix → |
| F15 | ERC processor communication faultF15 indicates internal ERC or UI communication failure. | View fix → |
| F16 | UI to ERC serial link faultF16 means lost serial link between touch UI and ERC. | View fix → |
| F17 | Meat probe jack circuit faultF17 appears when meat probe circuit is open or shorted on probe-equipped GE ovens. | View fix → |
15 codes documented with causes, fixes, and affected models.