GE Refrigerator Error Codes
GE refrigerators use H, FF, and CC codes on GNE, GFE, and Profile PFE French-door models.
General troubleshooting
Try these checks before opening a specific error code page—they resolve many GE refrigerator faults without parts.
- 1Clean condenser coils on GNE27JGMWW
- 2Check door gaskets and ice chute door
- 3Replace water filter every six months
- 4Clear defrost drain clog
- 5Verify recommended air clearance
Common symptoms
Owners often search for a code after noticing one of these issues on their GE refrigerator:
- H21 or fan fault on GNE27JGMWW
- Freezer OK, fridge warm
- Ice maker not producing
- Defrost heater H5 faults
- Compressor H9 start relay issues
All GE refrigerator error codes
| Code | What it means | Guide |
|---|---|---|
| FF | Freezer fan not runningFF on GE French-door refrigerators means the freezer evaporator fan failed to run or report speed. | View fix → |
| H1 | Freezer thermistor faultH1 indicates freezer temperature sensor signal failure. | View fix → |
| H2 | Fresh food thermistor faultH2 means refrigerator compartment thermistor failed. | View fix → |
| H3 | Defrost heater circuit openH3 indicates defrost heater circuit failure. | View fix → |
| H4 | Damper motor stuck closedH4 means motorized damper did not open between compartments. | View fix → |
| H5 | Defrost thermostat or timeout faultH5 relates to defrost not completing—thermostat or duration. | View fix → |
| H6 | Fresh food section too warmH6 is high-temperature alert in fresh food section. | View fix → |
| H7 | Freezer section too warmH7 means freezer exceeded safe temperature. | View fix → |
| H8 | Ice maker harvest or motor faultH8 indicates ice maker motor or harvest feedback failure. | View fix → |
| H9 | Compressor start device faultH9 means compressor did not start when commanded. | View fix → |
| HA | Door switch open too longHA means door detected open beyond timeout. | View fix → |
| HB | Water filter restriction or RFID faultHB relates to water filter status or excessive restriction on GE dispenser models. | View fix → |
| HC | Dispenser water valve or line faultHC indicates water dispenser circuit fault. | View fix → |
| HD | Dispenser UI communication faultHD means dispenser or console UI lost communication. | View fix → |
| HE | Main control communication faultHE is serial communication failure between main control and modules. | View fix → |
15 codes documented with causes, fixes, and affected models.