Frigidaire Oven Error Codes
Frigidaire ranges use F codes for RTD, door lock, and keypad faults on FCRE and FPEF models.
General troubleshooting
Try these checks before opening a specific error code page—they resolve many Frigidaire oven faults without parts.
- 1Dry control panel after liquid spill
- 2Cool oven before self-clean retry
- 3Verify 240V supply on electric ranges
- 4Clean door gasket and hinges
- 5Reset breaker after F11 or F13
Common symptoms
Owners often search for a code after noticing one of these issues on their Frigidaire oven:
- F11 shorted keypad after spill
- F10 runaway temperature
- Self-clean door lock F5 faults
- Broil works, bake doesn't
- Display error after power surge
All Frigidaire oven error codes
| Code | What it means | Guide |
|---|---|---|
| F03 | Open oven temperature sensorF03 means the oven temperature sensor circuit is open on Frigidaire ranges and wall ovens. | View fix → |
| F04 | Shorted oven temperature sensorF04 indicates a shorted oven sensor—the ERC disables heat. | View fix → |
| F05 | Door latch motor faultF05 means the door latch could not lock or unlock for clean or bake. | View fix → |
| F06 | Door lock switch circuit faultF06 means lock position feedback failed verification. | View fix → |
| F07 | Lock motor circuit failureF07 targets the lock motor output specifically. | View fix → |
| F08 | Cooling fan circuit faultF08 means the oven cooling fan did not start when required. | View fix → |
| F09 | Oven over maximum safe temperatureF09 is a safety shutdown from excessive cavity temperature. | View fix → |
| F10 | Runaway temperature detectedF10 indicates uncontrolled heating—ERC shuts all outputs. | View fix → |
| F11 | Shorted touchpad or keypadF11 means a short on the keypad matrix. | View fix → |
| F12 | Stuck keypad detectedF12 is a stuck-key fault without hard short. | View fix → |
| F13 | ERC EEPROM memory faultF13 means EEPROM checksum failed at power-up. | View fix → |
| F14 | ERC EEPROM data corruptionF14 is secondary EEPROM data corruption on the ERC. | View fix → |
| F15 | ERC processor communication faultF15 indicates internal ERC or UI communication failure. | View fix → |
| F16 | UI to ERC serial link faultF16 means lost serial link between touch UI and ERC. | View fix → |
| F17 | Meat probe jack circuit faultF17 appears on probe-equipped models when the meat probe circuit is open or shorted. | View fix → |
15 codes documented with causes, fixes, and affected models.